How to use Loader/upgrade tool for SR-2000HD Hyper
***Very Important: Please do not start this process if you don’t have time to complete by sitting near the receiver or any chance to cutt off your electricity. It will damage your receiver’s flash chip and it will brick. You will need to replace the motherboard in case of fail during the upgrade process***
1.Connect pc and box with rs232 line.
2.Open DongleUP.exe tool and press “Open” button to select correct file which you want to upgrade
3:Press “Start” button in DongleUP.exe tool.
4:Than turn “OFF” your receiver from the power button behind the box or to cut off your box’s electricity and turn it “ON” again.
5:Upgrade process will start. Now wait here for few minutes.
6:After successful upgrade, the box will reboot automatically
Starsat Sr 2000hd Hyper Loader
Starsat-2000 hd Hyper Loader-Download